PN 16 DN 500 Resilient Gate Valve DIN F4 OEM Buyer Brand,
Product Description :-
With thorough understanding of the relevant industry, we are
Trading, Distributing & Supplying a wide range of DI Resilient Soft
Seated Gate Valve in Jaipur, Rajasthan, India that ensures perfect
mechanism of regulating flow of water /gas / sewage. The offered
valve is designed under the vigilance of our skilled professionals
using optimum quality raw material and modern technology. This
valve is rigorously tested by our quality controllers on
pre-defined parameters in order to ensure its. durability.
Features:
* Precisely designed
* Rust proof
* Accurate dimensions
Specifications:
NO | Part name | Material |
1 | Body | Ductile cast iron |
2 | Wedge | Ductile cast iron + EPDM |
3 | Stem nut | ZCuAl10Fe3 Gunmetal |
4 | Gasket | EPDM |
5 | Bonnet | Ductile cast iron |
6 | Gland gasket | ZCuAl10Fe3 Gunmetal |
7 | Stem | 2Cr13 S.S.x 20Cr13 |
8 | Gland | Ductile cast iron |
9 | Rubber wiper | EPDM/NBR |
10 | Hand wheel | Ductile cast iron |
FEATURES
⊙ Shot-blasting
protective surface finished by shot-blasting and the surface is
smooth and neatness.
⊙ Flatting seat
Smooth continuous bore way without seating recess, it is not easy
to get impurity pilled up.
Making the liquid straightway.
⊙ Treating with rubber
Both inner and outer are coated with advanced knowledge of rubber
vulcanization then making
sure of the elasticity of rubber ,and make sure the exact geometry
dimension. Rubber and ductile
cast iron valve hand together hardly. This can avoid fall-off due
to long-term use.
⊙ Anti- corrosion
Both inner and outer are coated with non-toxic powder epoxy resin
to strengthen the capacity of Corrosion
resisting and raise the quality of
water supply.
⊙ Ruggedization
The older ductile iron valve is easy to rupture after being
impacted by nonego. It can stop
rupture depend on the good mechanics capability of ductile iron .
⊙ Three “○” sealed ring
With the three “O” – rings, the leakage can be greatly reduced and
the “O” – ring can be
replaced under this condition with pressure and without stopping
water. The thrust axletree
reduces the frictional resistance and lowers the operational
torque. And it can be switch seal
ring without opening and closing.
⊙ Rigid round body
The body is founded minutely, the rigid geometry size ensure inner
sealing of valve without any
process.
⊙ Light weight
This body is made of ductile iron, it is 20%-30% lighter than the
olds. Easily to fixing and
servicing.
APPLICABLE STANDARDS
⊙ American Standard
Design to ANSI/AWWA C509
Face to face dimension to ASME B16.10-2000(ISO 3 series)
Flange and drilling To SME/ANSI B16.42-1998
⊙ British Standard
Design to BS5163,BS5150
Face to face dimension to BS5163(ISO 3series,ISO19 series)
Flange and drilling To BS4504 part1(EN1092)
⊙ Germany Standard
Design to DIN3352
Face to face dimension to DIN3202(F4:ISO 14 series;F5: ISO 15
series)
Flange and drilling to BS EN1092
Applications: This valve widely applied in the liquid pipes for opening or
closing fixing in such water,
sewage disposal, electric power, energetics pipe , chemical,
shipping, energy sources etc.
